How To Choose Sockets/Sockets/Switches?

Switches and sockets range from a few yuan to tens of yuan, and the variety of online options is so dazzling. Today I will take you through the quality control, safety, materials, comfort, etc. of electric switch manufacturing. The series of indicators introduce in detail how to choose a socket? Let everyone buy with confidence and use with comfort.

1. There are many subjective factors in appearance, and everyone’s aesthetics is different, so I won’t go into details here. The focus is on the structure, base plate, and physical bridge during the of electrical switch manufacturing.

Metal base plate: Although the metal base plate has a better flame retardant effect, the plasticity is very low during the actual installation process. If the wall surface is uneven, it can easily cause non-fitting. Generally, low-quality or counterfeit sockets will be used to increase weight. Metal base, but not all products with metal base plates are necessarily fake products.

Panel shape: Generally, some five-hole sockets produced by electrical switch and socket manufacturers cannot use two or three plugs at the same time, which is very inconvenient, so be careful to choose the one with a larger hole between the two or three holes, or one with a five-hole socket. hole socket.

2. If the copper load plates in the plug and jack do not fit together or are not connected, the contact area will be reduced, causing excessive local resistance and heating. This is the reason for many fires caused by sockets.

Secondly, if there is a socket with a built-in USB hole, it is necessary to ensure that the USB power supply current is stable and does not damage the mobile phone.

3. With the continuous plugging and unplugging during daily use, the metal piece of the jack will deform to a certain extent. The inferior metal piece will deform after being plugged and unplugged a few times, which is more likely to cause virtual connections, sparks, high temperatures, etc.

And it is easy for the plug to loosen and fall off. The factor causing this problem is that the metal sheet has poor resilience and becomes loose over time.

Therefore, you can choose the socket metal sheet produced by a high-quality electrical switch socket manufacturer.

Finally, big brands must be good? Does the expensive one have to be of high quality? The answer is not necessarily. Choose rationally and buy products that are safe and suitable for you. Only good products! Or choose an electrical switch socket manufacturer or a custom switch manufacturer.

The safety of plug boards is the most important thing to the people, so you can never save money when buying electrical plug boards.