How to identify the quality of sockets based on material?

Mainly focus on the following points.

Material

PC and ABS are recommended for socket panels. PC material has good flame retardant and is safer to use. It is generally used in high-end sockets. ABS material is slightly worse.

Current carrying parts

The current-carrying parts are the parts that come into contact every time the plug is inserted. This part of the material is something that needs to be paid attention to when purchasing. The material is required to have heat resistance, stability, and elasticity. The materials are selected in the order of tin-phosphorus alloy>copper-zinc alloy (brass)>copper-containing alloy. When looking at the current-carrying parts, you can directly view the product introduction, and you can also notice the workmanship of the internal components. If it is thickened, enlarged, and has a larger cross-sectional area, it means it has better stability and conductivity, and is more durable. .

Terminals

In principle, the more terminals on the back of the socket, the better. Sockets that support more wires and allow for multi-strand connections are more practical.

fixed frame

The fixing brackets of sockets generally come in two types: steel and PC. Steel has high strength but also has high requirements on walls and wiring, while PC material is very tough and does not easily come off.

protective door

Use a shield to cover the jack to prevent children from getting electrocuted in pranks. Insert the two iron pieces together, and if you can clearly feel the resistance, it means there is a protective door. Nowadays, most brand sockets have protective doors.

3c certification

Even products of brands or general small businesses must pass 3C certification because it is related to electricity safety.

Choose kitchen switches and sockets

It is recommended to use a five-hole socket in the kitchen before purchasing. Frequent plugging and unplugging of various small kitchen appliances will affect the life of the switch to some extent, and it is also troublesome. If you choose a socket with a switch, you can turn it off directly. No need. Then unplug the socket, it is very convenient and safe! This is something I wholeheartedly recommend!

Bathroom switch with waterproof box

Whether it is next to the sink or the toilet, choose a socket with a waterproof box. If not, install a separate waterproof box. In spaces where water is frequently used, sockets with waterproof boxes are less likely to cause short-circuit failures and are more secure to use.

Choose 16A socket for air conditioner integrated stove, etc.

For high-power appliances such as air conditioners and kitchen integrated stoves, it is recommended to purchase 16A sockets, which are less likely to cause overload problems. This money cannot be saved. In addition, the air conditioner socket can also be installed upside down, which will make it more beautiful when plugged in.

Choose an oblique five-hole socket for the five-hole socket

There is also the choice of hole positions. The sockets that many people buy at home have five holes, which are often very close together. It is a complete waste of two sockets. One socket is often plugged in, and the other one is covered. Inclined five holes will avoid these problems!

Choose a USB socket next to the bedside sofa

In order to facilitate the use of small household appliances and the charging of mobile phones, it is recommended to use an ordinary 5-hole socket with USB or type-C. Of course, the price of such sockets is relatively high, so you should choose according to your needs!

Choose sockets with safety doors

Finally, for safety reasons, it is best to choose a secure door for the socket. Especially friends who are raising children at home, be sure to pay attention to this!

The choice of household switches and sockets still depends on personal needs. I hope everyone can choose the right switches and sockets.